01
Specification Review
Confirm the model code, drawing revision and required checks before production.
Model / drawing / agreed requirementsTAISHAN / QUALITY ASSURANCE
Quality Assurance
for Castors
& Wheels.
Quality requirements start with the selected model, drawing and application. Discuss the dimensions, functions and documentation your project needs.
Model referenceAgreed checksApplicable records
AI EQUIPMENT ILLUSTRATIONTHE QUALITY REQUIREMENT
Defined by the model.Reviewed for the application.
Illustrative test setup. This image does not document Taishan-owned equipment or verified test results.
01 / TAISHAN QUALITY ASSURANCE
Inspection
checkpoints.
A clear sequence for discussing the checks required for the selected model and order.
02
Component & Assembly Checks
Review the wheel, bearing, axle, bracket and control mechanism against the agreed configuration.
Selected components / configuration03
Functional Checks
Check wheel rotation, swivel movement and applicable control functions according to the inspection plan.
Applicable functions / inspection plan04
Order & Packing Review
Confirm model identification, quantity and packing requirements before dispatch.
Confirmed order / packing requirementsThe inspection scope follows the product and agreed plan. These checkpoints do not imply that every item receives every type of test.
Review the inspection items02 / TAISHAN QUALITY ASSURANCE
What we
check.
Inspection items are defined by the selected product and agreed requirements. References may include a model specification, drawing or approved project document.
| Inspection item | Review points | Reference basis |
|---|---|---|
| Model & ConfigurationUse the complete model reference. | Model identity, wheel material, bearing, bracket and applicable control configuration. | Confirmed model specification, catalog table or drawing. |
| Critical DimensionsIdentify critical dimensions and the drawing revision. | Wheel diameter and width, overall height, plate dimensions, fixing-hole centres and other agreed dimensions. | The relevant model drawing and agreed dimensional requirements. |
| Assembly & FunctionSpecify which functions require review. | Wheel and axle fit, wheel rotation, fork movement and applicable brake or directional-control functions. | Selected product configuration and inspection plan. |
| Appearance & Order DetailsAgree identification and packing requirements. | Visible finish, product marking, model identification, quantity and agreed packaging. | Confirmed order requirements and applicable reference documents. |
03 / TAISHAN QUALITY ASSURANCE
Testing
& verification.
A result needs a clear product reference, method and scope. Review the record alongside the requirement it is intended to address.
BEFORE REVIEWING A RESULT
One record.
A defined scope.
Check what was tested, how it was checked and which product, sample or batch the result covers.
Discuss a Required CheckWHAT A USEFUL TEST RECORD SHOULD SHOW
01
Product / Model
Identify the tested product and configuration.
02
Method
State the procedure or method reference.
03
Conditions
Record the conditions relevant to the result.
04
Date / Reference
Identify the actual record and its date.
05
Scope
Check the stated coverage for the model, sample or batch.
Need a specific method or acceptance criterion reviewed? Include it with the model reference so the applicable scope can be discussed.
Request a Review04 / TAISHAN QUALITY ASSURANCE
Product
documentation.
Document availability and scope depend on the selected product and request. Share the standard or report your project requires so applicability can be reviewed.
01
Product specification & drawing
Identify the complete model code, configuration and drawing revision needed for your comparison.
SCOPE TO CONFIRMSelected product and document revision
Enquire About Documents 02
Inspection & test records
Tell us the check, method or report your project requires. Availability and applicability will be reviewed.
SCOPE TO CONFIRMThe identified product, sample or batch
Enquire About Documents 03
Company & management documents
State the document and issuing-entity information you need. Company or system scope is reviewed separately from product results.
SCOPE TO CONFIRMNamed entity, activities and applicable validity
Enquire About Documents Company or management-system documentation and product test records describe different scopes. Check the relevant entity, date, status and applicability.
05 / DEFINE THE PROJECT REQUIREMENT
Agree requirements
before production.
Identify critical dimensions, functional checks and documentation needs during the enquiry stage. Our team will review the requested scope for the selected product.
Discuss Your Requirements Explore Our Manufacturing01
Critical dimensions
Share the drawing revision, mounting details and dimensions that matter to the installation.
02
Functions & acceptance
Describe the required wheel, swivel and control functions, together with any acceptance criteria.
03
Methods & records
Specify the requested check, method, test conditions or document. The applicable scope will be reviewed.
04
Order & packing
Identify the model, quantity, marking, destination and project-specific packing requirements.
BEFORE YOUR QUALITY REVIEW
Quality
questions.
What information should accompany a document request?
Provide the model code, destination market and required standard or report. Include any project-specific documentation requirements.
Can project-specific inspection requirements be reviewed?
Send the critical dimensions, functional checks and acceptance criteria. The available scope will be confirmed during review.
Does a test report cover every product model?
Review the tested model, method, conditions and stated scope. Applicability should be checked for the product being considered.
YOUR MODEL / YOUR QUALITY REQUEST
Define what needs review.
Include the model code, critical dimensions, required checks or documents, and destination market if known.